BK PRECISION 4012A CALIBRATION and BK PRECISION 4012A REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the BK PRECISION 4012A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Function Generator?
Shop for Comparable Products on our  used Function Generator page or new Function Generator page

 
   BK PRECISION 4012A   Description / Specification:   Spec Sheet 
BK PRECISION 4012A 5 MHz Sweep Function Generator

The B&K Precision 4012A 5 MHz Sweep Function Generator is for general bench and lab use with an ideal mixture of features and sweep function. It features Sine, Square, Triangle, Pulse & Ramp output, Variable duty cycle, Variable DC offset and a 4 digit LED display. Specifications. Frequency Range: 0.5 Hz to 5 MHz in 7 ranges. Waveforms: Sine, Square, Triangle, ±Pulse, ±Ramp. Resolution: 4 digits. Tuning Range: 10:1. Fine: ±5% of coarse setting. Variable Duty Cycle: 15:85:15 cont variable. Operating Modes: Normal, Sweep, VCG. Output Impedance: 50 ohm ±10%. Level: 20 V p-p Open circuit, 10V p-p into 50 ohm. Amplitude: Variable, 20 dB range typical. Attenuation: -20 dB ±1dB. DC Offset: Preset ±0.1 V typ, Variable; ±10V open-circuit ±5 into 50 ohm. Sine Wave Distortion: < 3% @ 1 kHz. Flatness: ±5% ±(0.45 dB) 0.5 Hz to 5 MHz. Square Wave Risetime (Into 50 ohms): <= 120 nS. TTL Output Level: 0.8V to 2.4V. Rise time: <= 20 nS. CMOS Output Max. Frequency: 2 MHz. Level: 4V to 14V ±0.5 p-p cont. variable. Rise Time: <= 120 nS. VCG Input Voltage: 0 to 10V ±1V causes a 100:1 frequency change. Frequency Counter Accuracy: Time Base Accy ±1 count. Time Base Accuracy: ±10 PPM (23°C ±5°C). Display: 4 digit LED.



 

Standard Calibration $160.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the BK PRECISION 4012A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Dynamic range
Dynamic range the ratio of a specified maximum level of a parameter, such as power, current, voltage or frequency, to the minimum detectable value of that parameter.

Modulation
Modulation is the process by which the characteristic of one wave (the carrier) is modified by another.

Repeatability
Repeatability is the variation in a number of repeated measured quantities when measurement conditions are changed and restored. The value corresponds to half the spread between the minimum and maximum value measured.

Please contact us for your BK PRECISION 4012A CALIBRATION and/or BK PRECISION 4012A 5 MHz Sweep Function Generator REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: